 |
| ADG SYSTEM |
| Gravimetric feeding |
| The precise gravimetric dosing unit ADG with an accuracy of 0.6 Kgs/1.000 Kg dosed, is suitable for use on extruders and co-extruders. |
|
|
|
 |
| AFC |
| Blow film cooler |
| AFC is a machine with a modern design which incorporates all components; it adopts the cooling cycle using water or air condensation in order to produce the quantity of air necessary for cooling the film at required conditions. |
|
|
|
 |
| FEEDERS READY |
| Centralized feeders three-phase |
| With READY the centralized plant may be easily increased up to 64 machine by simply connecting the motherboard with a twinex cable |
|
|
|
 |
| ASPIROPLAST AS |
| Feeders from 5 to 200 KG/H |
| The hopper loader of the ASPIROPLAST AS series are the system more economic and flexible for the feeding the material over the Transforming Machine. |
|
|
|
 |
| ASPIROPLAST AT |
| Caricatori da tramoggia trifase |
| The AT, three-phase feeling of the ASPIROPLAST series, are adapts for the feeding of the granule in the Injection Moulding Machine or Extruder for big-half production. |
|
|
|
 |
| ASPIROPLAST DUO |
| Feeders three-phase for hopper |
| Aspiroplast TRIS is a vacuum operated transport plant for materials such as granules or sliding dust (microspheres) with a three-phase motor; the plant is controlled and commanded by a microprocessor gearcase on the front of the control board where the parameters for each of the two connected cyclones may be set. |
|
|
|
 |
| ASPIROPLAST TRIS |
| Feeders three-phase for hopper |
| Aspiroplast TRIS is a vacuum operated transport plant for materials such as granules or sliding dust (microspheres) with a three-phase motor; the plant is controlled and commanded by a microprocessor gearcase on the front of the control board where the parameters for each of the three connected cyclones may be set. |
|
|
|
 |
| BAC |
| Blow film cooler |
| Cooling battery for processing air and work function as shown in layout BAC, for link-up with one Chiller.
|
|
|
|
 |
| BOX 80 - 180 -230 |
| Storing materials by the machine |
| The ideal solution for storing items materials by the machine, with the advantages of cost saving, and also not factors to be ignored attractive design and easy cleaning. |
|
|
|
 |
| BOX DELIVERY |
| Boxes transport |
| Automatic system for the filling and routing the pieces directly in the boxes under the trasformer machine; this machine is complety of the load cell for the weighing and the exact controll of the quantity of pieces for every boxes. It is complety of roller system.
|
|
|
|
 |
| FLEXIBLE SCREW CONVEYORS |
| Flexible screw |
| Flexible screw conveyors for powder or high dust content materials, particularly indicated for flours and micro-granules. |
|
|
|
 |
| DEHUMIDIFICATION SYSTEM DD 90-150-200 |
| Dehumidificators for smalls and medium quantity |
| The dehumidication of small and average-sized quantities of polymers may be perfectly carried out with the DD 30 and DD 60 series dehumidifiers. |
|
|
|
 |
| DEHUMIDIFICATION SYSTEM DD 90-150-200 |
| Dehumidificators for medium and big quantities |
| The series DD-Dry Tech dehumidifiers, dehumidify the air inside hoppers to dry the reasing, at a Dew point depending on the size of the plant and the requirement of the client to reach the (Dew Point) at 50C°. |
|
|
|
|
 |
| CHILLER CGD |
| Cooler system |
| CGD serie chillers cover all areas of industry requiring a reliable yet economic machine for cooling process waters. |
|
|
|
 |
| CHILLER DFH |
| Refrigeration system. |
| Refrigerator for waters of industrial trial, used in the transformation of the plastic subjects. |
|
|
|
|
 |
| CLEAR STAMP |
| Machine for the cleaning of the moulds |
| Clear Stamp, designed to replace the dangerous LPG cylinder used to heat metal sheets in order to release parts that would otherwise be impossible to remove from the dies. |
|
|
|
 |
| COLORTECH AP |
| Dosing high capacity, high precision |
| Colortech AP - suitable for batching large quantities of material and additives and particularly ideal for dosing on large-tonnage injection presses or extruders. |
|
|
|
 |
| COLORTECH EKO |
|
| Colortech EKO Masterbach dosing unit for regular granules with maximum size 2x2 mm, suitable for extruders and blowmoulders where a continuos and consistent distribution is required, with consumption under 100 Kg/h at 5% percentage maximum additive.
|
|
|
|
 |
| COLORTECH EXT |
| Doser indicates for Extruder or Blowmoulder. |
| Doser adapted for application on an Extruder or Blowmoulder, the Doser receives a start-up voltage of 0-10 V and is self-calibrating. |
|
|
|
 |
| DOSER GR. |
| Gravimetric doser to absolute precision |
| COLORTECH GR – this Dosing model is the most suitable machine for those requiring absolute accuracy. |
|
|
|
 |
| COLORTECH LQ |
| Dosing liquids |
| Colortech LQ dosing unit for liquid and dense colorants. |
|
|
|
 |
| COLORTECH STEP |
| Doser of masterbach and granules |
| Colortech batchers are composed of a modular system that produces a machine with excellent versatile qualities. |
|
|
|
 |
| COLORTECH TEST III |
| Doser for Injection Moulding Machines. |
| Colortech Test III - suitable for use on Injection Moulding Machines. |
|
|
|
 |
| CRYSTALLIZER |
|
| A new PET crystallization process that assure a prefect amorphous state to cristalline PET state continuous |
|
|
|
 |
| DD 30-60 |
| Dehumidificators for small and averages quantity |
| The dehumidication of small and average-sized quantities of polymers may be perfectly carried out with the DD 30 and DD 60 series dehumidifiers. |
|
|
|
 |
| DD 90-150-200 |
|
| The series DD-Dry Tech dehumidifiers, dehumidify the air inside hoppers to dry the reasing. |
|
|
|
|
 |
| DRY PLAST 12.000-15.000 |
| Driers of 12.000 - 15.000 Watt |
| DRY PLAST 6000 – 9000 –12000 – 15000 can also be combined with drying units for drying various different kinds and quantities of materials. |
|
|
|
 |
| DRY PLAST 3000 |
| Driers of 3000 Watt |
| DRY PLAST 3000 is the most versatile drier of its category. In fact it can be easily positioned on the original press hopper. |
|
|
|
 |
| DRY PLAST 6000-9000 |
| Driers of 6000 - 9000 Watt |
| DRY PLAST 6000 – 9000 –12000 – 15000 can also be combined with drying units for drying. |
|
|
|
 |
| DRY PLAST AC |
| Dryer for compressed air |
| DRY TECH AC Dryer-dehumidifier with dry compressed air, able to to dehumidify the process air with a medium dew point even of - 18°C. Microprocessor thermoregulator. |
|
|
|
 |
| ECOENERGY SYSTEM |
| Refreshing system |
| This modular system of cooling for the refreshing of machines |
|
|
|
|
|
| |
 |
| GDM SYSTEM |
| Gravimetric doser |
| This type of gravimetric dosing unit is suitable for injection moulding, blow moulding and extruding machines, as well as filling and packaging machines. The unit is suitable for granular and powder materials. |
|
|
|
 |
| GELBOY |
| Machine for cleaning moulds |
| GELBOY is the most efficient de-scaler for cleaning exchangers. |
|
|
|
 |
| DG GRANULATORS |
| Granulators multiblade |
| Granulators belonging to the DG series are manufactured for the granulation of large product quantities. |
|
|
|
|
 |
| GS GRANULATORS |
| Granulators for discards and big details |
| Granulators belonging to the GS series, designed for use beside a press, originate from the basis of warehouse granulators. |
|
|
|
 |
| MAGNETIC SCREENS |
| Magnetic separator |
| Magnetic screews builts with permanent brass or stainless steel magnets in the UNIVERSAL shape, they are adaptable to whatever shape hopper, round or square. |
|
|
|
|
 |
| DRAWER-TYPE MAGNETIC SCREEN |
| Magnetic separator |
| Studied to be mounted on the basis of containers or on the drain of mixers to keep the iron parts presents in the granule. |
|
|
|
| |
 |
| LTA SYSTEM |
| Detecting microleaks |
| This is certainly the most versatile and all-round machine for detecting microleaks. |
|
|
|
 |
| LTS SYSTEM |
| Detecting microleaks |
| Standard basic machine for detecting microleaks, suitable for testing phials of products leaving the blowing machine without oriented release. |
|
|
|
 |
| MCT MINICHILLER |
| Refrigeration system |
| They ideally integrate a cooling system with air-water temperature exchange batteries for the cooling and thermoregulation of dies and moulds. |
|
|
|
|
 |
| MIX 120-200-350 |
| Mixers on side machines |
| Feed screw mini-blenders, ideal for blending granules or powders in small to medium quantities. |
|
|
|
 |
| MVP |
| Vertical screw-feed blenders for medium and large |
| Vertical screw-feed blenders for mixing granules or powders in medium large quantities. |
|
|
|
|
 |
| BELT WITH COOLING TANK |
| System of transports of the pieces |
| The water in the tank can be cooled by continuos flow or thermally regulatedusing an optional heat exchanger. The belt speed can be adjusted by means of a mechanical speed variator. |
|
|
|
 |
| DOUBLE FIXED CURVED BELT |
| System of transports of the pieces |
| Belt with flap-type separator supplied standard. The upper and lower flat sections are joined to the inclined section with fixed corners. |
|
|
|
 |
| DOUBLE ARTICULATED CURVED BELT |
| System of transports of the pieces |
| Belt with flap-type separator supplied standard. The upper and lower flat section are joined to the inclined section with adjustable corners. |
|
|
|
 |
| FIXED CURVED BELT |
| System of transports of the pieces |
| Belt with a flat section for collecting and inclined section for elevating parts - fixed inclination. |
|
|
|
| |
 |
| ADJUSTABLE CURVED BELT |
| System of transports of the pieces |
| Belt with a flat section for collecting and inclined section for elevating parts adjustable inclination. |
|
|
|
 |
| INCLINED BELT |
| System of transports of the pieces |
| Belt elevating parts to load into containers. |
|
|
|
 |
| FLAT BELT |
| SYSTEM OF TRANSPORTATION OF PIECES |
| Belt normally positioned inside the press or blower. |
|
|
|
 |
| SPECIAL FLAT BELT |
| System of transports of the pieces |
| Normally built to customer specifications. |
|
|
|
|
| |
 |
| RAPID INSERT |
| Machine for inserts |
| Rapidinsert, designed to pre-heat metal parts that are to be inserted into the moulded plastic art. |
|
|
|
|
| |
|
 |
| METAL SEPARATOR |
| Magnetic separator |
| Metal separator removes metallic contaminations from bulk materials. These materials, for example can be plastic granules, dry powder, rice or similar products from different industries. |
|
|
|
| |
 |
| DISTRIBUTOR SERVER |
| Distributor of the products |
| The server is an ancillary that is used in conjunction with a conveyor belt or a robot. |
|
|
|
|
